18 x 8 Pressure Washer Shelf, Stainless Steel Shelving
18 x 8 Pressure Washer Shelf, Stainless Steel Shelving
Made specifically to hold the Kranzle K1322TS or K1622 pressure washer at Obsessed Garage. Made of T304 Stainless Steel 18" Wide x 8" Deep. Available for sale online from Obsessed Garage. Shop Now >.
I had this custom made specifically to hold the Kranzle K1322TS or K1622TS pressure washer. It's so pretty, it's almost a shame to put anything on it.
- Comes w/ 2 Mounting Brackets and Shelf
- You will need to supply mounting screws to attach to the wall. They are not included.
- Made of T304 Stainless Steel
- 18 Wide x 8 Deep
- Optional Hardware
- 2 - 3/4 T-304 anti-vibration clamps
- 2 - 5/8 T-304 anti-vibration clamps
- 2 - 3/8 T-304 anti-vibration clamps
- 6 - 5/8 Stainless Hex Bolts
- 6 - Wing Nuts
The optional hardware add-on includes mounting hardware and snug-fit anti-vibration clamps to strap the pressure washer down, route the power cord, and hold the jumper hose in place.
Note, I'm sending this without any pre-drilled holes. The holes you see in the photo are 3/16 that I drilled with a basic metal bit. You'll want to lay out your pressure washer and mark the holes with a sharpie. Make sure you leave enough room between the wall and the unloader valve (red knob) to operate.
- I drilled both holes 4 5/8 from the left edge of the shelf.
- Back hole is 2 3/8 and the front hole is 6 1/8 off the back wall.
IMPRESSIVE STORAGE CAPACITY - With six tiers of shelving, this Commercial unit boasts an enormous amount of space and shelving. It's able to provide a
18 D×48 W×72 H Wire Shelving Unit Metal Shelf with 6 Tier Casters Adjustable Layer Rack Strong Steel for Commercial Restaurant Garage Pantry
RELIABILT 3/8-in compression x 1/2-in Fip x 30-in Braided Stainless Steel Flexible Faucet Supply Line in the Toilet & Faucet Supply Lines department at
I had this custom made specifically to hold the Kranzle K1322TS or K1622TS pressure washer. It's so pretty, it's almost a shame to put anything on it.
18 x 8 Stainless Steel Pressure Washer Shelf
Stainless Steel Shelving
Made specifically to hold the Kranzle K1322TS or K1622 pressure washer at Obsessed Garage. Made of T304 Stainless Steel 18 Wide x 8 Deep. Available
18 x 8 Stainless Steel Pressure Washer Shelf
Stainless Steel Worktable Shelf (SHE18308) – Seville Classics
I had this custom made specifically to hold the Kranzle K1322TS or K1622TS pressure washer. It's so pretty, it's almost a shame to put anything on it.
18 x 8 Stainless Steel Pressure Washer Shelf
GRIDMANN 18 x 72 Stainless Steel Kitchen Wall Mount Shelf with Backsplash
Seville Classics SHE18308SH Commercial NSF Stainless Steel Top Worktable Shelf