Two sheets 5/16 x 5 x 12 Float Glass and 7 Sheets 3M™ PSA Lapping Film — Taylor Toolworks

September 22,2024

This set contains two sheets 5/16" x 5" x 12" dead flat float glass and 7 sheets of 3M™ lapping film 4-1/4" x 11" in the following microns sizes .3, 1, 3, 5, 12, 30, and 40 5/16" float glass is dead flat and the perfect substrate to attach abrasive sheets Float glass will accommodate a half sheet of lapping film Lappin

This set contains three sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes .3.

Taytool 279205 Three Sheets 5/16 x 5 x 12 Deal Flat Float Plate Glass with 7 Sheets 3M (TM) Lapping Microfinishing Film 4-1/4 x 11 for Scary Sharp

7 Sheet Variety Pack PSA Pressure Sensitive Adhesive (.3, 1, 3, 9, 12, 30 and 40 microns) Lapping Microfinishing Film Aluminum Oxide (AO) 8-1/2 x 11 Inches

This set contains a single sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes .3. 1,3,5,12,30 and 40. 5/16 Float glass is dead flat and the perfect substrate to attach abrasive sheets. Float glass will accommodate a half sheet of lapping film. Lapping film has Pressure Sensitive Adhesive (PSA) backing with 3 mil high-strength polyester film backing to minimize tearing.

Taytools 279205 Lapping Microfinishing Sharpening

7 Sheet Variety Pack PSA Pressure Sensitive Adhesive (.3, 1, 3, 9, 12, 30 and 40 microns) Lapping Microfinishing Film Aluminum Oxide (AO) 8-1/2 x 11 Inches

Three sheets 5/16 x 5 x 12 Float Glass and 7 Sheets 3M™ PSA Lapping — Taylor Toolworks

Taytool 279182 Single Sheet 5/16 x 5 x 12 Dead Flat Float Plate Glass with 7 Sheets 3M (TM) Lapping Microfinishing Film for Scary Sharp Sharpening System : Tools & Home Improvement

Lapping Film Sheets & Rolls - In Stock

Taytool 279182 Single Sheet 5/16 x 5 x 12 Dead Flat Float Plate Glass with 7 Sheets 3M (TM) Lapping Microfinishing Film for Scary Sharp Sharpening System : Tools & Home Improvement

Lapping Film Sheets & Rolls - In Stock

Taytool 279205 Three Sheets 5/16 x 5 x 12 Deal Flat Float Plate Glass with 7 Sheets 3M (TM) Lapping Microfinishing Film 4-1/4 x 11 for Scary Sharp Sharpening System : Tools & Home Improvement

This is a set of three pieces 5/16 thick x 5 x 12 float glass for use as a flat, hard surface in a the Scary Sharp sharpening system. Float glass is dead flat and the perfect substrate to attach abrasive sheets. Piece will accommodate 1/2 sheet of 8-1/2 x 11 microfinishing or lapping film. Comes with anti-slip pad. The Scary Sharp sharpening method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective.

One Sheet 5/16 x 5 x 12 Float Glass for Scary Sharp System

This lapping film is 100% made in the USA by 3M™. These microfinishing lapping sheets were developed for industrial applications and can be used to

3M™ 10 Sheet Pack Aluminum Oxide 8-1/2 x 11 Microfinishing/Lapping Film PSA

This set contains three sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes .3.

Taytool 279205 Three Sheets 5/16 x 5 x 12 Deal Flat Float Plate Glass with 7 Sheets 3M (TM) Lapping Microfinishing Film 4-1/4 x 11 for Scary Sharp